Realtek Hd Audio Manager; Power Management - Toshiba PORTÉGÉ Z10t-A WT310 series User Manual

1.
2.
3.
If you feel the microphone volume level is inadequate, move the
Microphone Boost slider to a higher level.
Audio Enhancements
In order to apply the sound effects for your current speaker, follow the
steps below.
1.
2.
3.

Realtek HD Audio Manager

You can confirm and change the audio configuration using the Realtek HD
Audio Manager. To launch the Realtek HD Audio Manager:
When you first launch the Realtek HD Audio Manager, you will see two
device tabs. Speakers is the default output device. Microphone is the
default input device. To change the default device, click the Set Default
Device button under the chosen device tab.
Information
Click the Information button
information, and language setting.

Power Management

The audio controller in your computer can be turned off when the audio
function is not used. To adjust the configuration of audio power
management, click the Power Management button
User's Manual
Right click on the speaker icon on the Taskbar, and select Recording
devices from the sub menu.
Select Microphone, and click Properties.
On the Levels tab move the Microphone slider to increase or
decrease the microphone volume level.
Click Desktop and right click on the Speakers icon on the Taskbar,
and then select Playback devices from the sub menu.
Select Speakers, and click Properties.
On the Enhancements tab select the sound effects you would like,
and click Apply.
Click Desktop -> Desktop Assist -> Control Panel -> Hardware
and Sound -> Realtek HD Audio Manager.
When audio power management is enabled, the circle button at the
upper left of the Power Management is blue and convex.
When audio power management is disabled, the button is black and
concave.
to view hardware information, software
.
4-31