Listening to the radio
XL-E2H
ENGLISH
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button to select the desired fre-
quency band (FM or AM).
3
Press the TUNING/FOLDER (
the desired station.
Manual tuning:
Press the TUNING/FOLDER (
required to tune in the desired station.
Auto tuning:
When the TUNING/FOLDER (
more than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/FOLDER (
button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
"
" will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural
and the sound becomes clearer.
E-19
or
) button to tune into
or
) button as many times as
or
) button is pressed for
or
FM stereo receiving indicator
MHz
ST
FM stereo mode indicator
)