Connect Water Supply Line And Drain Hoses - Jenn-Air DRAWER DISHWASHER Installation Instructions Manual

Connect Water Supply Line and Drain
1. Connect water supply line to the water valve under the sink.
A. Hot water supply
2. Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
3. Push hoses into Y drain connector until fully seated (Figure B).
Several "clicks" will be heard.
4. Slide clamps into position (figures C and D).
A
C
5. Connect the drain hose using one of the following options:
10
Hoses
B
D
Option 1: Waste disposer no drain air gap
A
A
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
Option 2: No waste disposer and drain air gap
B
A
Option 3: Waste disposer and drain air gap
A
B
C
B
A. Drain hose connector
B. Drain air gap
C. Waste
A. Drain hose connector
B. Drain air gap
C. Waste
C
C