2-1: Ddr Dimm Slot Population - Gigabyte GA-9ILDTH User Manual

GA-9ILDTH Motherboard

2-1: DDR DIMM Slot Population

Table 1. Supported DIMM Module Type
Technology Organization
256MB 8MB x 8 x 4 bks
16MB x 4 x 4bks
512MB 16MB x 8 x 4bks
32MB x 4 x 4bks
1GB 32MB x 8 x 4bks
64MB x 4 x 4bks
Table 2. DIMM Placement DDR2-400
DIMM Configuration
1 Single Rank
1 Dual Rank
2 Single Rank
1 Dual Rank, 1 Single Rank
2 Dual Rank
3 Single Rank
1 Dual Rank, 2 Single Rank
Installation Step:
1. Unlock a DIMM socket by pressing the retaining clips outwards.
2. Aling a DIMM on the socket such that the moyches on the DIMM exactly match the notches in the
socket. Please note that DIMM must be populated in order starting at the nearest slot from
the ATX power.
3. Firmly insert the DIMMinto the socket until the retaining clips snap back in place.
4. When installing the DIMM into the DIMM socket, we recommend to populate one DIMM in
Channel A module and one in Channel B module for best performance.
Please note that each logical DIMM must be madeof two identical DIMMs having the same
device size on each and the same DIMM size.
5. Reverse the installation steps when you wish to remove the DIMM module.
SDRAM Chips/DIMM
8
16
8
16
8
16
DIMM1 DIMM2
Empty Empty
Empty Empty
Empty Single Rank
Empty Single Rank
Empty Dual Rank
Single Rank Single Rank
Single Rank Single Rank
1 4
DIMM3
Single Rank
Dual Rank
Single Rank
Dual Rank
Dual Rank
Single Rank
Dual Rank