Table of Contents
Advertisement
Security
Main
Advanced
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Password On Boot
F1: Help
: Select Item
Esc: Exit
: Select Menu
About This Section: Security
In this section, user can set either supervisor or user passwords, or both for different level of
password securities. In addition, user also can set the virus protection for boot sector.
Set Supervisor Password
You can install and change this options for the setup menus. Type the password up to 6
characters in lengh and press <Enter>. The password typed now will clear any previously
entered password from the CMOS memory. You will be asked to confirm the entered
password. Type the password again and press <Enter>. You may also press <Esc> to abort
the selection and not enter a specified password or press <Enter> key to disable this option.
PhoenixBIOS Setup Utility
Security
Server
Boot
Clear
Clear
[Enter]
[Enter]
[Disabled]
+ -: Change Values
Enter: Select
Sub-Menu
Figure 3: Security
4 9
BIOS Setup
Exit
Item Specific Help
F5: Setup Defaults
F10: Save&Exit
Advertisement
Table of Contents
