Technical Information; Specifications - JVC LT-26DX7BGE Instructions Manual

Technical information

"Dolby Digital" output from the "DIGITAL AUDIO OUT" terminal
Some digital channels are broadcasted with "Dolby Digital" signals.
In these cases, "Dolby Digital" signals can be output from the "DIGITAL AUDIO OUT" terminal.
1. Connect an audio system with a "Dolby Digital" decoder. (P. 10)
2. Change the "Digital Audio Output" setting from "PCM" to "Dolby Digital". (P. 43)
When changing the setting, the message "Dolby Digital selected! No analogue audio available." may be

displayed for a few seconds.
Each time the channel is changed to a channel that is broadcast with "Dolby Digital" signals, the message

"Dolby Digital selected! No analogue audio available." may be displayed for a few seconds.
Even if "Dolby Digital" is set, "linear PCM" signals will be output by a channel that is not broadcast with "Dolby

Digital" signals.
Set the audio system so that it is compatible with both "Dolby Digital" and "linear PCM". (For details, refer to
the audio system instruction manual.)
When you want to temporarily change the setting from "Dolby Digital" to "PCM", change with the "Audio

selection" menu (P. 29).
 Set "Digital Audio Output" to "PCM" in the following cases.
The sound of a channel broadcast with "Dolby Digital" signals cannot be heard even when "Dolby
Digital" is set.
When listening with the TV speakers.

When listening with an audio system that does not have a "Dolby Digital" decoder.

When listening with an audio system that is connected to the "AUDIO OUT" terminal.

When recording a programme.

 If a language with "(Dolby)" is selected when "(Dolby)" is displayed in the "Audio selection" menu
(P. 29), the "Digital Audio Output" setting can be temporarily changed from "PCM" to "Dolby
Digital".
A message recommending you to change the "Digital Audio Output" setting to "Dolby Digital" is displayed for

a few seconds.
 If you want to record a "Dolby Digital" signal using timer-record (P. 27), change the "timer-record
setting" from "PCM / Analogue" to "Dolby Digital". However, if the setting is changed to "Dolby
Digital", you cannot record analogue sound with a recording device that is connected to the EXT-2
terminal.
 "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
57
Specifications
(continued)
Model
Broadcasting systems
Colour systems
Channels and frequencies
Sound-multiplex systems
Teletext systems
Power requirements
Audio output (Rated power output) 10 W + 10 W
Speakers
Power consumption
[standby]
Screen size
(visible area size measured diagonally) 80 cm
Dimensions (W x H x D: mm)
[without stand]
Weights
[without stand]
Accessories
A Conditional Access Module for watching pay-TV digital channels can be installed (P.8)

 DC power can be supplied to the indoor aerial (P.56)
Terminal name
EXT-1
Input / Output
terminals
EXT-2
EXT-3
EXT-4
Input terminals
EXT-5 (HDMI-1)
EXT-6 (HDMI-2)
PC INPUT
AUDIO OUT
DIGITAL
Output
AUDIO OUT
terminals
Headphone
We may change the design and specifications without notice.

Main unit
LT-32DX7BGE/SGE LT-26DX7BGE/SGE
CCIR I / B / G / D / K / L (See "Technical information", P. 56)
TV broadcast : PAL, SECAM
External input : PAL, SECAM, NTSC 3.58/4.43MHz
Digital : E5-E69 (Frequency : 177.5 MHz-862MHz)

Analogue :

E2-E12 / E21-E69, F2-F10 / F21-F69, IR A-IR J, ITALY A-H / H+1 / H+2,
R1-R12 / R21-R69, S1-S41, X / Y / Z / Z+1 / Z+2,
French cable channels (Frequency : 116-172 MHz / 220-469 MHz)
NICAM (I / B / G / D / K / L), A2 (B / G / D / K)
Digital : EBU TEXT
Analogue : FLOF (Fastext), TOP, WST (World Standard System).
AC 220 V - 240 V, 50/60Hz
5.0 cm round x 2
134 W 120 W
[0.6 W] [0.6 W]
66 cm
800 x 591.6 x 244.2 672 x 517.6 x 244.2
[800 x 545 x 133.5] [672 x 471 x 133.5]
18.7 kg 15.5 kg
[16.3 kg] [13.1 kg]
(See "Check accessories", P. 6)
Terminals / Connectors
Terminal type Signal type (IN)
Euroconnector x 1 Composite video, S-video,
(SCART connector) Analogue RGB, AUDIO L / R
Euroconnector x 1 Composite video, S-video,
(SCART connector) Analogue RGB, AUDIO L / R
RCA connectors x 3, Composite video, S-video
S-VIDEO connector x 1 AUDIO L / R
Analogue component
(576i (625i) / 480i (525i),
RCA connectors x 5 Progressive : 576p (625p) / 480p (525p),
HD : 1080i (1125i), 720p (750p))
AUDIO L / R
HDMI
(576i (625i) / 480i (525i) /
HDMI connector x 1
576p (625p) / 480p (525p),
1080i (1125i), 720p (750p))
D-SUB (15 pins) x 1 Analogue PC signal (P. 56)
RCA connectors x 2
OPTICAL connector x1
Stereo mini-jack x 1
(3.5 mm in diameter)
Signal type (OUT)
TV out
Dubbing out
(S-VIDEO out is
available only for
digital channels)
Audio L / R
Digital audio
(48 kHz,16 bit linear
PCM / Dolby Digital)
Headphone output
58