Table of Contents
Advertisement
Technical information
AT-V LINKB allows the TV to share information easily with a connected AT-V LINKB compatible device.
By using T-V LINK:
You can send the channel information programmed on the TV to the AT-V LINKB compatible device, so that both the
TV and the external device have the same channel settings. When connecting a new external device, channel
information is loaded into it, allowing channel setup to be completed very quickly. For more details, refer to the
external device's manual.
You can easily record the TV programme you are viewing on a AT-V LINKB compatible device by using the
ADIRECT RECB feature. For more details, refer to the external device's manual.
Connect a ADVIB device to the HDMI connector using ADVI-HDMIB conversion cable. Connect analogue sound output of
the DVI device to L and R terminals in EXT-3.
Attach a new plug following the steps below. If in doubt, contact your local retailer.
Important
Never connect to the larger terminal marked with an AEB, the safety earth symbol A
green-and-yellow.
The wires in the mains lead on this product are coloured with the following code:
• Blue: Neutral wire (connect to the black terminal, or one marked ANB)
• Brown: Live wire (connect to the red terminal, or one marked ALB)
Open the plug as illustrated on the right.
When replacing the fuse, always use a correctly rated and approved type and re-fit
the fuse cover when finished.
If in doubt, contact your local retailer.
What is AT-V LINKB?
Connect ADVIB devices
If you accidentally cut the power cord
Change the fuse in the plug
B or coloured green or
Fuse
30
Advertisement
Table of Contents
