Watching Tv; Turning On The Power; Turning Off The Power - Sharp LC-65G5X Operation Manual

Watching TV

Display
AVC System
POWER button
POWER indicator

Turning on the power

Before turning on the power make sure you have completed
required connections. (See pages 7 and 13.)
POWER
1
button
2
POWER
indicator

Turning off the power

Press POWER on the remote control unit or POWER on the
Display.
• The System enters standby mode and the image on the screen
disappears.
• Both POWER indicators change from green to red.
Press POWER on the Display.
• The POWER indicator on the Display turns off.
• When the System is turned off by POWER on the Display, you
cannot turn on the power by pressing POWER on the remote
control.
POWER indicator
Off
Red
Green
NOTE
• Check if the system cable is connected properly when display
indicator flashes red.
• If you are not going to use this System for a long period of time, be
sure to remove the AC cords from the power outlet.
• Minor power is cosumed when the unit is in standby mode.
Press POWER on the Display.
• POWER indicator (Green): The System is on. (After a
few seconds, programme information appears with
sound.)
• POWER indicator (Red): The System is in standby. (Go
to step 2.)
Use any of the methods below to power on. Powering
on changes the indicator from red to green.
• Press POWER on the AVC System.
• Press POWER on the remote control.
Power off
The System is in standby mode.
The System is on.
17