Connecting A Pc - Sharp LC-65G5X Operation Manual

Using external equipment

Connecting a PC

Use the INPUT5 terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 63 for a list of PC signals compatible with the System.
AVC System (rear view)
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• When connecting to a PC, the correct input signal type is automatically detected. (See page 54.) If the PC image does
not come in clearly, you may need to set the Auto Sync. adjustment in the "Setup" menu. (See page 48.)
46
DVI cable
(commercially available)
ø 3.5 mm stereo minijack cable
(commercially available)
RGB/DVI conversion cable
(commercially available)
ø 3.5 mm stereo minijack cable
(commercially available)
To watch the image from
this input terminal, you
need to select input signal
type (see page 49).
AUDIO(R/L)
PC
To watch the image from
this input terminal, you
need to select input signal
type (see page 49).
AUDIO(R/L)
PC