Ferris HydroCut Series Operator's Manual page 18

Operation
The amount of grass you are able to cut in one pass
is also effected by the type of mowing system you are
using (for example, broadcasting with side discharge
decks can process a much larger volume of grass
than mulching does).
Figure 2. Proper Cutting Height
Tall Grass Requires Incremental Cutting
For extremely tall grass, set the cutting height at
maximum for the first pass, and then reset it to the
desired height and mow a second or third time.
Don't cover the grass surface with a heavy layer of
clippings. Consider using a grass collection system
and starting a compost pile.
Cut Here On
First Pass
Figure 3. Incremental Cutting
16
When and How Often to Mow
The time of day and condition of the grass greatly
affect the results you'll get when mowing. For the best
results, follow these guidelines:
1. Mow when the grass is between three and five
inches high.
2. Mow with sharp blades. Short clippings of grass
one inch or shorter decompose more quickly than
longer blades. Sharp mower blades cut grass
cleanly and efficiently, preventing frayed edges
which harm the grass.
3. Mow at time of day when the grass is cool and
dry. Late afternoon or early evening often provide
these ideal mowing conditions.
4. Avoid mowing after rain or even heavy dew, and
never mulch when the grass is wet (moist grass
does not mulch well, and clumps beneath the
mower deck).
Mowing Patterns
Always start mowing on a smooth, level area.
The size and type of area to be mowed will determine
the best mowing pattern to use. Obstructions such as
trees, fences and buildings, and conditions such as
slopes and grades must also be considered.
1. Cut long straight strips overlapping slightly.
2. Where possible, change patterns occasionally
to eliminate matting, graining or a corrugated
appearance.
3. For a truly professional cut, mow across the lawn
Cut
in one direction, then recut the lawn by mowing
Here On
perpendicular to the previous cut.
Second
Note: Always operate the engine at full throttle
Pass
when mowing.
If you hear the engine slowing down, you are mowing
too fast—using a slower ground speed will improve
the cutting efficiency of the blades and prevents many
common cutting problems. Use an appropriate ground
speed for the thickness and height of the grass
you are cutting (3rd gear or slower for manual gear
models). If you hear the engine slowing down you are
mowing too fast, use a slower ground speed.
www.ferrisindustries.com