Installation & Accessories - Philips TFT LCD Colour Monitor Service Manual

8 190B4 LCD
Installation Locations
Avoid Heat and Extreme Cold
1. Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold.
2. Avoid moving the LCD monitor between locations with large temperature differences. Choose a site falling with in the
following temperature and humidity ranges.
Temperature: 5-35°C 41-95°F
Humidity:20-80% RH
3. Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD monitor inside a car trunk.
4. Take care not mishandle this product by either knocking or dropping during operation or transportation.
5. Do not store or use the LCD monitor in locations exposed to high humidity or a dusty environment. Also do not allow water or
other liquids to spill on or into the LCD monitor
Correct handling of the monitor
1. When handling the monitor, grip the bottom firmly with both hands and ensure that the front panel faces outward before lifting.
Please refer to the diagram on the right.
2. Handling the monitor with carp prevents scratching and damage. If the monitor becomes damaged, immediately disconnect
the power from the unit and have it checked by a qualified service person before using it again.
3. To prevent fire or electrical shock, do not drop the monitor.
4. When moving the monitor, be sure to unplug all power cords in order to avoid injury or damage to the equipment.
Accessory Pack
Unpack all parts.
Item
Installation & Accessories
Description 190B4CG
Power Cable(socket may v
differ for different
countries)
Macintosh Adapter(for v
USA only)
VGA Signal Cable Only for US Model
E-DFU package with Quick v
Setup Guide, Using Your
Monitor Manual, and
CD-ROM
190B4CS 190B4CB
v v
v v
Only for US Model Only for US Model
v v