Hitachi CP-AW3019WN Operating Manual page 81

Item
WIRED SETUP
(continued)
WIRED
INFORMATION
(continued on next page)
Use the ▲/▼ buttons to enter the TIME
DIFFERENCE.
Set the same TIME DIFFERENCE as the one
set on your computer. If unsure, consult your IT
manager.
TIME
Use the ► button to return to the menu after
DIFFERENCE
setting the TIME DIFFERENCE.
• When this item is set, the same item in the
WIRELESS SETUP menu is overwritten with the
same setting (76).
Use the ▲/▼/◄/► buttons to enter the Year (last
two digits), Month, Date, Hour and Minute.
• When this item is set, the same item in the
WIRELESS SETUP menu is overwritten with the
same setting (77).
• The projector will override this setting and retrieve
DATE AND
DATE AND TIME information from the Time server
TIME
when SNTP is enabled. (Date/Time Settings in
the Network Guide)
• This setting will be reset if the projector is turned
off while STANDBY MODE in the SETUP menu is
set to SAVING (51), or when the AC power is
turned off.
Selecting this item displays the WIRED INFORMATION dialog for
viewing the wired LAN settings.
• For details of PASSCODE, refer to the manual for "LiveViewer".
• Only the first 16 characters of the PROJECTOR NAME are dis-
played.
• IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate
"0.0.0.0" when DHCP is ON and the projector has not gotten address
from DHCP server.
Description
NETWORK menu
81