Table of Contents
Advertisement
Interactive pen
Interactive pen
Installing the battery
1.
Turn the battery cover of the pen to the left to open
it.
2.
As illustrated in the diagram, insert the AAA battery
into the battery cover with the - end facing the front.
(HITACHI MAXELL, Part No. LR03)
3.
Attach the battery cover by turning it to the right
until it is completely closed.
Exchanging the tip of the pen
When the tip of the pen is shortened due to wearing,
exchange it according to the following procedure.
1.
Remove the tip of the pen referring to the
illustration.
2.
Fit a new tip into the place and push it so that it
clicks.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified.
• Do not hold a battery with tweezers or the like.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
• If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
• Keep the tip of the pen away from children and pets. Exercise care to prevent
them from swallowing the tip of the pen or the pack of spare accidentally. If
swallowed consult a physician immediately for emergency treatment.
CAUTION
20
►Always handle the batteries with care and use them only as
► Do not drop the pen or mishandle it.
The tip of
the pen
Advertisement
Table of Contents
