Table of Contents
Advertisement
NETWORK menu
Item
WIRELESS
SETUP
(continued)
(continued on next page)
78
Use the ▲/▼
buttons to select the
SSID to display the
SSID menu.
#1 DEFAULT ó #2 DEFAULT ó #3 DEFAULT
Select one of the DEFAULT (#1~#4) and press ►
or ENTER button.
To adjust CUSTOM
Press the ► or ENTER button when the # 5
CUSTOM is selected. The SSID #5 CUSTOM
menu will be appeared.
(1) The current SSID will be displayed on the
first line. The custom SSID is "wireless" by default.
Use the ▲/▼/◄/► buttons and the ENTER or
INPUT button to select and enter characters. To
erase 1 character at one time, press the RESET
button or press the ◄ and INPUT button at the
same time. Also if you move the cursor to DELETE
or ALL CLEAR on screen and press the ENTER or
INPUT button, 1 character or all characters will be
erased. The SSID can be input up to 32 characters.
SSID
(2) To change an
already inserted
character, press the
▲/▼ button to move
the cursor to one of
the first 2 lines, and
use the ◄/► buttons
to move the cursor
on the character to
be changed. After
pressing the ENTER
or INPUT button, the
character is selected.
Then, follow the
same procedure as
described at the item
(1) above.
(3) To finish entering text,
move the cursor to
the OK on screen and press the ►, ENTER or
INPUT button. To revert to the previous name without
saving changes, move the cursor to the CANCEL on
screen and press the ◄, ENTER or INPUT button.
Description
#5 CUSTOM ó #4 DEFAULT
Advertisement
Table of Contents
