Minute Timer; Locking The Controls - Kenmore INDUCTION COOKTOP Use & Care Manual

Induction cooktop
Hide thumbs Also See for INDUCTION COOKTOP:
Table of Contents

Advertisement

Available languages

Available languages

Setting Cooktop Controls

Minute Timer

The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track
of time from 1 to 99 minutes. The LED display located to the left of the Timer UP/DOWN arrow key pads will begin to count
down minutes once set.
To Set the Minute Timer:
1. Touch the
listed under the word "TIMER". Touching and releasing the
or decrease the Minute Timer setting by 1 minute with each key press (up to
2. Once the Timer LED displays the desired amount of time, release the UP or DOWN Arrow key pads. The small dot to
the right of the digit will flash. Once the dot disappears, the MinuteTimer will begin the countdown with remaining
minutes. Once the Minute Timer reaches
To Cancel the Minute Timer:
1. Touch the
and
00 00 00 00 00
scroll to
.
2. If cancelling the Minute Timer using the scrolling method, once the Main Control LED reaches
key pad.
3. The LED will flash momentarily and then quit flashing. The set time will disappear from the LED indicating that the
MinuteTimer is no longer active.

Locking the Controls

The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.
To Turn ON the Controls Lock Feature:
1. The Cooktop Lock will not activate until the cooktop is OFF. If the cooktop power is not OFF, touch and hold the
key pad until a beep sounds (about 1 second). The Power Indicator light located above the
OFF.
2. Touch the
key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the
turn ON indicating the cooktop is locked. This will keep any Cooking Zone or Cooktop functions from being accidentally
turned ON (See Fig. 5)
To Turn OFF the Controls Lock Feature:
1. Touch the
key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the
turn OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be
used (See Fig. 4).
2. If the cooktop is needed you must touch and hold the
Indicator Light located above the
Zones.
00 00 00 00 00
a long beep will sound indicating that the time is up.
key pads at the same time or touch and hold either the
key pad will turn ON. (See Fig. 7). You may now activate any of the Cooking
99 99 99 99 99
minutes).
key pad until a beep sounds (about 1 second). The Power
11
or the
key pads will increase
or
key pad and
00 00 00 00 00
, release the Arrow
key pad will turn
key pad will
key pad will

Advertisement

Table of Contents
loading

Table of Contents