Setting Continuous Bake Or 12 Hour Energy Saving; Setting Timer - Kenmore 790.4500series Use & Care Manual

Setting Oven Controls

Setting Continuous Bake or 12 Hour Energy Saving

Timer
The TIMER and FLEX CLEAN
Set/Off
oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour Energy
Saving features
Timer
1. Press and hold
Set/Off
or «- -h» will appear in the display and the control will beep once.
Flex
2. Press Clean to switch between the 12 Hour Energy Saving and
continuous bake features. Note: «12h» (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving mode and «-
-h» indicates the control is set for the Continuous Bake feature (Figure
3).
START
3. Press to accept the change (Figure 4; display will return to time
STOP
of day) or press

Setting Timer

Timer
The TIMER
pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that
Set/Off
will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
INSTRUCTIONS
To set the Kitchen Timer (example for 5 minutes)
Timer
1. Press . «--:--» will appear and «TIMER» will flash in the display
Set/Off
(Figure 5).
2. Press the number pads to set the desired time in the display (example
5
START
). Press . The time will begin to count down with «5:00»
and «TIMER» will stay in the display (Figure 6). Note: If
pressed the timer will return to the time of day after 25 seconds.
3. When the set time has run out, «End» and «TIMER» will show in the
display (Figure 7). The clock will sound with 3 beeps every 5 seconds
Timer
until is pressed.
Set/Off
To cancel the Kitchen Timer before the set time has run out
Timer
Press . The display will return to the time of day.
Set/Off
To Set Add 1 Minute Feature
Add 1
The Minute ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the
to the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the
pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.
Flex
Clean pads control the Continuous Bake or 12 Hour Energy Saving features. The
for 7 seconds (Figure1). After 7 seconds «12h»
to reject the change.
PRESS
Timer
Set/Off
seconds
Flex
Clean
START
or
PRESS
Timer
Set/Off
5
START
is not
Timer
Set/Off
Add 1
Minute
16
DISPLAY
TIMED DELAY TIMER
DOOR LOCKED CLEAN
for 7
Figure 1
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 2
TIMED DELAY TIMER
DOOR LOCKED CLEAN
STOP
Figure 3
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 4
DISPLAY
TIMED DELAY TIMER
DOOR LOCKED CLEAN
START
Figure 5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 6
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 7
pad is pressed, 1 minute is added
Add 1
Minute
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
pad is