Honda CR85 Expert Owner's Manual page 97

6. Remove the throttle cable (5) and cable holder
(6) from the throttle valve (7).
7. Remove the cable holder and throttle valve
spring (8) from the throttle cable.
8. Remove the throttle cable holder and jet
needle (9) from the throttle valve.
(8)
(6)
(7)
(9)
(5) throttle cable (8) throttle valve spring
(6) cable holder (9) jet needle
(7) throttle valve
9. Remove the float bowl screws (11) and float
bowl (12).
(11)
(8)
(5)
(7)
(11) float bowl screws
10.Use a float level gauge (13) to measure the
float level (14) with the float tab just
contacting the float valve and the carburetor
intake (15) facing up. The float level should
be 0.75 in (19 mm). Adjust the float level by
bending the float tab carefully.
(5)
(13) float level gauge
(14) float level
Carburetor Adjustments & Tuning Tips
11.To assemble, reverse the disassembly
procedures.
12.To install the carburetor, reverse the removal
procedures.
(12)
After installing the carburetor, check the air vent
hoses (16) and overflow hose (17) for kinking or
(11)
pinching and correct routing as necessary.
(12) float bowl
(16) air vent hoses
(15)
(14)
(13)
(15) carburetor intake
(16)
(16)
(17)
(17) overflow hose
Adjustments for Competition
93