Adding Front Brake Fluid
The recommended brake fluid is Honda DOT 4
brake fluid from a sealed container, or an
equivalent.
When adding brake fluid be sure the reservoir is
horizontal before the cap is removed or brake
fluid may spill out.
(1)
(4)
(1) screws
(3) diaphragm
(2) reservoir cap
(4) upper level mark
1. Remove the screws (1), reservoir cap (2) and
diaphragm (3).
2. Fill the reservoir with DOT 4 brake fluid to
the upper level mark (4). Do not overfill.
3. Reinstall the diaphragm and reservoir cap.
4. Tighten the screws securely.
Adding Rear Brake Fluid
The recommended brake fluid is Honda DOT 4
brake fluid from a sealed container, or an
equivalent.
When adding brake fluid be sure the reservoir is
horizontal before the cap is removed or brake
fluid may spill out.
(2)
(3)
(1) reservoir cap
(2) diaphragm
1. Remove the reservoir cap (1) and diaphragm
(2).
2. Fill the reservoir with DOT 4 brake fluid to
the UPPER level mark (3). Do not overfill.
3. Reinstall the diaphragm and reservoir cap.
4. Tighten the bolts securely.
Other Inspection
• Make sure there are not fluid leaks.
• Check for deterioration or cracks in the hoses
(1)
(2)
(3)
(3) UPPER level mark
and fittings.
Servicing Your Honda
Brakes
59