Kenmore 10478 Use & Care Manual page 8

CONVERSION INSTRUCTIONS
Side Burner Conversion
1. Loosen the side burner screws to expose
the side burner valve.
Insert the tool onto the valve and unscrew orifice
from end of valve. Put the new orifice into the
orifice removal tool and tighten the new orifice
into the valve.
Make sure you are using the correct orifice,
which is marked "1.31". (Fig. 12)
Fig. 12
2. Engage burner tube over valve as shown.
(Fig. 13)
The side burner
Fig. 13
Natural Gas Hose Connection
1. Remove the LP gas hose and regulator using a wrench, and attach the natural gas hose in
it's place. (Fig. 14)
NG Hose
LP gas hose and regulator
Fig. 14
8