Download Print this page

Kenmore 141.15804 Owner's Manual

Stainless steel rotisserie kit for kenmore elite & kenmore premium grills.
Hide thumbs
   

Advertisement

Owner's Manual:
Stainless Steel Rotisserie Kit for
Kenmore Elite & Kenmore Premium Grills
141.158031
for 3/4 Burner Kenmore and Kenmore
Elite Grills:
141.15804
for 5/6 Burner Kenmore and Kenmore
Elite Grills:
CAUTION:
It is recommended
that you do not exceed 7 pounds when using your rotisserie.
Heavier foods can cause the rotisserie
spit to flex excessively
causing
the rotisserie
motor to be
overloaded
due to imbalanced
operation.
Foods heavier than 7 pounds can be cooked by the
indirect method instead of
using the rotisserie.
1.
Read all instructions
before initial use.
2.
Always
attach the assembled
Rotisserie
to your grill first, then plug the Cord into an
outlet. To disconnect,
turn the Rotisserie
"OFF" then remove the Plug from outlet.
3.
Most grill surfaces and Rotisserie
parts are hot during and after cooking.
Use
reasonable
care around your grill and Rotisserie
and wear insulated cooking
mitts.
Only maneuver
the Rotisserie
by its black Handle.
4.
5.
To protect
against electrical
shock, do not immerse
Electrical
Cord,
Plug or Motor in
water or expose to rain. Protect electrical
elements
from burners, hot grill surfaces
and grease.
Do not operate
the Rotisserie if the cord or plug becomes
damaged,
or if the
Rotisserie
malfunctions
or has been damaged
in any manner.
6.
7.
Do not let children operate
your grill or Rotisserie.
Do not let children
play nearby.
Unplug the Rotisserie from electrical
outlet when not in use and before cleaning.
Allow to cool before adding or removing
parts. When the Rotisserie
is not in use,
store it indoors
in a dry place.
8.
The use of accessory
attachments
(baskets,
rib racks, etc) is not recommended
by
the manufacturer
and may cause injuries.
Do not use Rotisserie
for other than
intended use.
9.
When rotisserie
cooking
place a Cooking
Pan under the food to be cooked.
This will
capture the drippings
and keep your grill clean of excess grease which could cause
a fire. Use caution when moving a Cooking
Pan containing
hot oils.
10. Never line the bottom of your grill bowl with aluminum foil, sand or any grease
absorbent substance.
11. Should a grease fire occur, turn the burners and gas off and leave the grill lid
CLOSED
until the fire is out.
12. The Rotisserie
Motor is set for 110/120V,
60 Hz AC current.
13. This Rotisserie is for outdoors
use only.
Z_ WARNING
Your grill and rotisserie
will get very hot. Never lean over the cooking area
while using your grill. Do not touch cooking
surfaces,
grill housing, grill lid or any
other grill parts or accessories
while the grill is in operation,
or until you are certain
the grill has cooled down after use. Failure to comply
with these instructions
may
result in serious bodily injury.
Save this Owner's
Manual for future
reference
P80132079B
Rev:2003/08/08

Advertisement

   Related Manuals for Kenmore 141.15804

   Summary of Contents for Kenmore 141.15804

  • Page 1

    Owner's Manual: Stainless Steel Rotisserie Kit for Kenmore Elite & Kenmore Premium Grills 141.158031 for 3/4 Burner Kenmore and Kenmore Elite Grills: 141.15804 for 5/6 Burner Kenmore and Kenmore Elite Grills: CAUTION: It is recommended that you do not exceed 7 pounds when using your rotisserie.

  • Page 2

    Stainless Steel Rotisserie Assembly Instructions Tools required for assembly: Adjustable wrench or pliers and either a fiat head or Phillips head screwdriver, Pre-Assembly Instructions Before assembling your Rotisserie, use the parts list below to check that all necessary parts have been included. Inspect parts for damage as you proceed.

  • Page 3

    Assembling The Motor Bracket Attach the Motor Bracket on the outside of the left grill bowl panel. Align the two holes of the Bracket with the holes on the grill bowl. Tighten securely using two #10-24 x 3/4" UNC screws, washers and nuts provided.

  • Page 4

    Grill Models 16690/17690 Extra 4" Extension Spit Grill Models 16680/17680, 16228/17228 Extra 6-1/2" Extension Spit Screw the two Spit sections together using one Lock Washer. Tighten the sections together using two wrenches. Slide a Food Skewer onto each end of the assembled Rotis Spit. Adjust spacing between Skewers to accommodate your food, then tighten the Thumbscrews to keep the Food Skewers in position.

  • Page 5

    Installing Rotisserie Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the left side of your grill and the Handle on the right side. Place the Bushing into the slot opening on the right side of your grill bowl, then tighten the Collar Thumbscrew to the left of the Bushing.

This manual also for:

141.158031

Comments to this Manuals

Symbols: 0
Latest comments: