Kenmore 10478 Use & Care Manual page 26

CONVERSION INSTRUCTIONS
Natural Gas Hose Connection
1. Remove the LP gas hose and regulator using a wrench, and attach the natural gas
hose in it's place. (Fig. 58)
Adjust valve control screw
1. Pull all the knobs off of valve stems.
Adjust the screw in the valve hole
using the flathead screwdriver. Turn
screws two complete turns
counterclockwise.
(Fig. 59)
2. Press all the knobs back onto valve stems.
3. After all the conversions are complete, return heat diffusers to firebox, followed by the
grates and warming rack.
LP gas hose and regulator
Valve hole
26
NG Hose
Fig. 58
Fig. 59