Advertisement
Available languages
Available languages
CONVERSION INSTRUCTIONS
3.
Replace it with the NG orifice, and then tighten.
Make sure you are using the correct orifice,
marked "1.4". (Fig. 26)
Natural Gas Hose Connection
1. Remove the LP gas hose and regulator using a wrench, and attach the natural gas
hose in it's place. (Fig. 27)
LP gas hose and regulator
Rear burner
13
1.4
Fig.26
NG Hose
Fig. 27
Advertisement
Need help?
Do you have a question about the 10478 and is the answer not in the manual?
Questions and answers