Table Of Contents - Husqvarna HS2 Owner's/Operator's Manual

HS2
Contents
US-2
Instructions contained in warnings within this manual and warning seals marked
with a symbol on the sprayer concern critical points which must be taken into
consideration to prevent possible serious bodily injury, and for this reason you
are requested to read all such instructions carefully and follow them without fail.
Note that there may be times when warning seals peel off or become soiled and
impossible to read. If this happens, you should contact the dealer from which you
purchased the product to order new seals and affix the new seal(s) in the
required location(s).
NOTES ON TYPES OF WARNINGS
Instructions labeled as shown at left, concern critical steps or procedures
which must be followed in order to prevent accidents which could lead to
serious bodily injury or death.This mark is used to indicate instructions
which must be followed without exception.
Instructions labeled as shown at left concern steps or procedures which, if not
followed correctly, could lead to mechanical failure, breakdown, or damage.
Used to label supplementary instructions designed to provide hints or directions
useful in the use of the product.
SAFETY FIRST
1. Parts location.................................................................... 3
2. Specifications ................................................................... 3
3. Warning labels on the machine ........................................ 3
4. For safe operation ............................................................ 3
5. Set up ............................................................................... 6
6. Pre Operation ................................................................... 7
7. Operation......................................................................... .7
8. Maintenance .....................................................................8
9. Storage .............................................................................8
10. Disposal........................................................................... ..8