Table of Contents
Advertisement
20 | DMR User Manual 4.0
Titles & Credits
JPEG images can be uploaded to the DMR in the Titles &
Credits selection of the main menu. Images uploaded
here can be specified in the profile parameters.
Images must be in JPEG format.
To upload an image, browse to the JPEG you wish to
use and click on the Upload button. Individual images
can be viewed or deleted using the controls provided on
each graphic.
An image that is larger than the native
content captured will be scaled to
best fit the content window. An image
that is smaller than the native content
captured will be centered in front of
the recorded content.
Note: The Studio Package allows for selecting templates
AV Controls
Audio input and output levels can be adjusted either by
sliding the pointer along the bar, or by entering a value
from 0 to 100 in the text field. You can also mute the
output by clicking on the icons. Event tones can be
turned on to alert you when an event occurs. For
example you will hear a tone when you stop recording.
August 2009
AV Test
The DMR has the ability to test audio and video to
connected output devices without the need for live
input sources. There are four audio test tones for
confirming the audio outputs of the DMR. There are
three test images for confirming video output to a
locally connected monitor. Once a test tone or image
has been selected, use the Stop Test button to end the
test.
Live Video Test
The "content" and "video1" inputs can be tested to a
local monitor. To test the high-resolution input, click
on either the S-Video or Composite image and the
source connected to that input will display on the local
monitor. To test the standard-definition input, click on
either the Composite or S-video image and the video
source connected to that input will display on the local
monitor.
Display Settings
Description
Setting
The aspect ratio of the output can be specified to be
Aspect Ratio
either 4x3 or 16x9
When enabled overlays the elapsed and duration
Media Status Player
time of the media file during playback on the DMR .
VTC Settings
Description
Setting
Uses the LAN to have the DMR receive the command
Connection
and record when a call is placed with the codec .
The IP Address of the codec that you want to record
IP Address
The Telnet password of the codec that you want to
Password
record .
Note: Video 2 option is enabled with
Studio Package.
Advertisement
Table of Contents
