Front Panel; Optical Drive; Front Keypad; Led Status - Media Pointe MediaPointe User Manual

2
| DMR User Manual 4.0
1
Front Panel View
The front panel consists of an Optical Drive, the main
operation Keypad, two status LEDs, a small RESET
button, IR receiver, a power switch and a USB port.
The following is a brief description of each of these
components.

1 . Optical Drive

The DMR features an optical drive capable of recording
to DVD-R, DVD+R, and CD-R media.

2 . Front Keypad

The DMR has a front keypad that allows the user to
start and stop recording as well as navigate the on
screen menus without using the remote control. When
the REC button is pressed a menu will appear on the
display so you can determine which recording profile to
use. A monitor is required to use this feature.
August 2009
2 3 4 5

3 . LED Status

The LED indicators are used to describe system
states, actions and error conditions. The valid LED
states are described in the table below.
LED 1 (top)
RED/YELLOW/ ORANGE
Powering On Orange
Ready OFF
Record/Stream RED
Indexing RED Fast Blink
Play/ OFF
Error YELLOW Fast Blink
Disk Burn RED Slow Blink
Mute OFF
(not record)
Mute (record) RED

4 . RESET Button

To avoid inadvertent resetting of the system, the
RESET button is hidden behind a tiny hole in the
front panel and requires activation using a small
device such as a pin or paperclip. Pressing the
RESET button will reset the Administrator Password
and return the IP settings back to the default
network settings.

5 . IR Receiver

The IR Receiver is used with the included remote
control.
DMR Front Panel
6 7
LED 2 (bottom)
BLUE
OFF
ON
ON
ON
Slow Blink
OFF
ON
Fast Blink
Fast Blink