Power Switch; Usb Port - Media Pointe MediaPointe User Manual

3
DMR |
DMR Front Panel
1 2 3 4 5 6 7

6 . Power Switch

This POWER button on the front of the unit will turn the
unit on and off. It is used in conjunction with the main
power switch on the rear of the unit.
1. Ensure power supply switch is in the ON position
(on back panel)
2. Start the unit by pressing the POWER button

7 . USB Port

The USB port can be used to offload media from and
to the DMR. It can also be used to set or capture an IP
address. See the Network Configuration section for USB
IP address configuration.