Pioneer S-FCRW4500 Operating Manual page 4

www.pioneerelectronics.com
4. Connect the speaker system.
Refer to the setup guide provided to connect the speakers
properly. After connecting the speaker wires, thread the front
speaker cord through the outlet on the base of the speaker
stand as shown below. Make sure to use a stable surface when
doing this, and lay the speakers flat on their side.
To keep the stand steady when upright, tuck the cord into the
groove on the bottom as shown below.
Refer to the setup guide provided for
optimal surround sound placement.
4
Front surround 3-spot setup (S-FCRW4500 only)
This setup is ideal when rear surround speaker placement isn't
possible or you want to avoid running long speaker cables in
your listening area.
Front
left
Surround
left
Listening position
1. Attach the non-slip pads to the base of the center speaker.
Use the adhesive to attach 4 pads to the base of center speaker.
2. Connect the speaker system.
See "CONNECTING YOUR SYSTEM" for how to connect the
speakers. After connecting the front speaker wires, thread the
front speaker cords through the outlet on the base of the
speaker stand as shown below. Make sure to use a stable
surface when doing this, and lay the speakers flat on their side.
Center
Front
right
Subwoofer
Surround
right