Safety Precautions When Setting Up - Pioneer S-FCRW4500 Operating Manual

www.pioneerelectronics.com

SAFETY PRECAUTIONS WHEN SETTING UP

When assembling the speakers, lay them down flat on their side to
avoid accidents or injury. Make sure to use a stable surface when
assembling, setting up, and placing the speakers.
ASSEMBLING THE SPEAKER STANDS AND
SECURING YOUR FRONT SPEAKERS
1. Attach the speaker stand bases to the stems using the screws
provided.
Using four small screws for each speaker stand, secure the base to
the stem as shown in the illustrations below.
Make sure the Pioneer logo on the stem is facing forward, and the
outlet on the base (for the speaker cord) is towards the back.
Pioneer logo
Speaker cord outlet
Once you have aligned the stem and base, secure with the
small screws at the points shown at above.
2
2. Place the front speakers onto the speaker stands as shown
below.
Line up the base of the speaker with the stand (figure A), then
push the speaker slowly onto the speaker stand (figure B). Use
even pressure to make sure the speaker is fully inserted and
secure.
A B