Haier RF-8888-395 Service Manual page 13

button 3 times will adjust the temperature 3 degrees, press 4 times equals 4
degrees, 5 times equals 5 degrees, and so on. Once you have selected the
temperature you desire, push the "Light/Set" button. Now the wine cooler is
programmed and the LED readout will return to current internal temperature
reading
¡ ñ There will be a 3 degree variance +/- between the temperature you select and
the temperature indicated on the LED readout. This occurs because the wine
cooler activates and deactivates trying to maintain your desired temperature.
There is often a 10° variance between the top and bottom shelves of the wine
cooler. Therefore, if you have set the wine cooler for 50° and have a mix of red
and white wines, you may want to put the white wine on the bottom shelf where
the temperature will be 45° F, and place the red wine on the top shelf where the
temperature will be 55° F.
Mechanical Control Unit: See fig. # 2
Fig. #2 :
¡ ñ Your wine cooler has a temperature control knob on the back of the unit.
INSTALLATION AND ACCESSORY PARTS
Mid Range
Coldest
OFF
£ ± £ ±