Mitsubishi MJ-E16VX-S1 Service Manual page 10

[ Timer Operation ]
OFF timer operation
The OFF timer can be set for 1 to 9 hours.
Set the timer when the power is switched on.
To set
1
Switch the power on.
2
Select operating mode.
Select desired operating mode.
3
Change the louvre swing direction.
Select the desired setting.
4
Set the operating time.
¡ When pressed once the figure [
¡ Each subsequent press changes the display in order from 1 to 9 hours.
(Hold the button to run automatically through the numbers.)
No Display
(LOW mode)
➝ The OFF timer is set.
The following is an example of a display indicating AUTO dehumidifying
(set to 60%), swing set to WIDE and the OFF timer set for 2 hours.
¡ The time remaining until the unit switches itself off is
indicated in increments of one hour with a flashing numeral.
¡ When the set time is reached, the unit switches
itself off and the louvre closes automatically.
¡ Drying inside will commence if it has been activated.
To cancel the OFF timer
<When you want to turn the unit off>
Press the POWER button. (Power off)
¡ The OFF Timer is cancelled.
<When you want to disable the Timer OFF
mode, and continue operation>
Keep pressed until the remaining time display
disappears to return to continuous operation.
¡ The OFF Timer is cancelled.
∞ Empty the water tank before operating. The unit
stops and the Tank full lamp lights if the tank
becomes full during operation.
∞ The OFF timer and ON timer cannot be set at the
same time.
∞ Do not use timer OFF mode in conjunction with
LAUNDRY or MIDEW GUARD.
∞ The OFF timer cannot be set during internal drying.
10
Press
] and [OFF] appear.
Press
Press
ON timer operation
The ON timer can be set for 1 to 9 hours.
Set the timer when the power is switched off.
To set
1
Switch the power off.
2
Set the time you wish the unit to turn on.
¡ Press once. The Power lamp, Mode indicator, and a [ ]
on the digital display flash. The [ON] indicator lights.
¡ Each subsequent press changes the display in
order from 1 to 9 hours.
(Hold the button to run automatically through the
numbers.)
No Display
(operation
is off)
3
Select operating mode.
Select desired operating mode.
Set drying inside (auto) as desired.
4
Change the louvre swing direction.
Select the desired setting.
5
Confirm the operating start time.
¡ Power lamp and Time display light.
➝ The ON timer is set.
The unit informs you if you forget to press the Power
button by making the Time display and Mode
indicator blink and sounding an alarm for 1 minute.
The following is an example of a display indicating
AUTO dehumidifying (set to 60%), swing set to WIDE
and the ON timer set for 5 hours.
¡ The time remaining until the unit switches itself on
is indicated in increments of one hour.
¡ When the set time is reached, the unit switches
itself on.
To cancel the ON timer
Press the Power button. (Power off)
¡ The ON timer is cancelled.
∞ Drying inside is deactivated when the ON timer is
set during internal drying operations.
∞ The ON timer function is not operable using a
commercially-available timer plug outlet.
Press
Press
Press