Replacing The Lamp (Wtm2000Wc) - Westinghouse WTM1800WC User Manual

LAMp REpLAcEMENt
iNStRUctioNS foR ModEL wtM2000wc
1 . Switch off the power at the power point and remove the
cord by pulling the plug .
2 . Remove the screw from the centre of the control panel .
3 . Apply pressure with your finger tip to the top centre of
the light lens . This will release a catch on the back face
of the lens that holds it to the light housing .
4 . Remove the lens .
OPERATION
10
5 . Unscrew the light bulb in an anti-clockwise direction .
6 . Screw the new light bulb into place using a cloth . Do
not allow your fingers to touch the new bulb as the
oils from your skin can cause hot spots on the globe,
shortening its life .
7 . Clip the light lens on and replace the screw .
TIPS & INFORMATION
Not all 15 watt screw-in lamps will fit the lamp housing .
Appropriate replacement lamps can be purchased from
Electrolux or by calling 13 13 50.