Table of Contents
Advertisement
Climate Controls
Turning the EATC system off
Press OFF.
OFF
OFF REAR 1
TEMP
A/C
AUTOMATIC
Automatic operation
Press AUTOMATIC and select the desired temperature. The selected
temperature and the word AUTO will appear in the display window. The
EATC system will either heat or cool to achieve the selected
temperature. The system will automatically determine fan speed, airflow
location and if outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed thumbwheel is turned or the
steering wheel fan speed control (if equipped) is pressed.
When in AUTOMATIC and weather conditions require heat, air will be
sent to the floor. However, if the engine is not warm enough to provide
heat, the fan will be at a low speed and the air will be directed to the
windshield. In approximately 3
1
⁄
minutes or less, the fan speed will start
2
to increase and the airflow location will change to the floor area.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.
Temperature selection
The display window indicates the
F
˚
selected temperature, function
AUTO
(AUTO or one of the override
controls) and manual control of fan
speed (
) if automatic fan speed is not desired.
64
Advertisement
Table of Contents
