Mitsubishi Electric MSZ-A09RV-E1 Service Manual page 24

9-1. "I FEEL CONTROL" (
1. Press OPERATE/STOP button on the remote controller. OPERATION INDICATOR lamp of the indoor unit will turn on
with a beep tone.
2. Press OPERATION SELECT button to set "I FEEL CONTROL"(
3. The operation mode is determined by the initial room temperature at start-up of the operation.
Initial room temperature
more than 25:
23: to 25:
less than 23:
Once the mode is fixed, the mode will not change by room temperature afterwards.
Under the ON-TIMER (
starts.
When the system is stopped with the OPERATE/STOP button on the remote controller, and restarted within 2 hours in "I
FEEL CONTROL" (
Example
Previous operation
COOL mode of
"I FEEL CONTROL"
or COOL mode
When the system is restarted after 2 hours, the operation mode is determined by the initial room temperature at start-up
of the operation.
Example
Previous operation
COOL mode of "I
FEEL CONTROL"
or COOL mode
4. The initial set temperature is decided by the initial room temperature.
Model
COOL mode of
"I FEEL CONTROL"
DRY mode of
"I FEEL CONTROL"
HEAT mode of
"I FEEL CONTROL"
1 After the system restarts by the remote controller, the system operates with the previous set temperature regardless
of the initial set temperature
The set temperature is calculated by the previous set temperature.
) OPERATION
Mode
COOL mode of
"I FEEL CONTROL"
DRY mode of
"I FEEL CONTROL"
HEAT mode of
"I FEEL CONTROL"
) operation, mode is determined according to the room temperature as the operation
) mode, the system operates in previous mode automatically regardless of the room temperature.
Initial room temperature
26: or more
26: or less
23: to 25:
23: or less
) Then a beep tone is heard.
Restart
COOL mode of "I
FEEL CONTROL"
Restart
COOL or DRY or HEAT
mode of "I FEEL CONTROL"
that determined by initial
room temperature start-up of
the operation.
Initial set temperature
24:
Initial room temperatureminus 2:
Initial room temperatureminus 2:
24
1
26: