Advertisement
• The SPDif in- and outputs are clocked for the different digital sources.
By switching over between inputs, there can be a synchrony moment occur where by the
converter stays in the mute mode. The DA468 can in that situation be reset by switching
off with the power switch for aprox. 10 seconds and then again to on.
• The SPDif XLR and RCA inputs are able to receive all digital stereo sources up to
24bit/200kHz.
SPDif optical has a bandwidth up to 100kHz.
The USB inputs have a bandwidth to 50kHz.
The Q-Link inputs use the supplied data from the CD transport, the MCK master clock
output has standard a frequency of 16.9344MHz, but can be changed if necessary for the
connected transport.
All formats offered at the inputs will be transfered by the a-synchronous Sample Rate
Converter to 24bit/192kHz resolution, so that the converters always works in an optimal
performance.
• By the analog RCA outputs, the upper is for the Left channel, the bottom for the Right
channel. For the XLR balanced outputs, the Right is for the Left channel and the Left for
the Right channel, seen from the back.
• For your convenience you will find a red sticker, indicating "phase". The phase of your
electricity system can be determined with a voltage seeker.
• The converter must only be cleaned with a cloth, impregnated with a Ph-neutral cleaning
fluid. And it must be mildly moist! NEVER use strong fluids and/or erasers. Before
cleaning ALWAYS remove the power cord from its wall socket, by its plug not by its cord.
• The optimum operating temperature is reached after approx. several hours of continuous
play. Then it will be possible to start enjoying the superb van Medevoort audio qualities of
this converter. In the stand-by position, only the amps are switched off. This reduced the
time for warming up significantly. Test this warm up time in your own setup.
• We strongly recommend that you use a high quality Interconnect cable. E.g. the
renowned van Medevoort Silver Cable. Also for the power cords.
7
vM DA468 STEREO DIGITAL / ANALOG CONVERTER
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
Advertisement
