Advertisement
INSTRUCTION LEAFLET FOR CONNECTING A CD-TRANSPORT VIA
Because there are different Multi-Link formats on the market we have upgraded the DA468
to switch the correct settings for input 6.
You have to do this only once when installing, the system keeps this setting.
Default is vM CT460.
•
Q-Link (I2S) for the vM CT460:
Keep the input knob 1 pressed for approx 5 seconds, while switching ON the mains power of
the vM DA468 converter.
•
SuperLink (16Bit/RJ) for the CEC TL1N, TL3N and TL51X(R)*:
Keep the input knob 2 pressed for approx 5 seconds, while switching ON the mains power of
the vM DA468 converter.
* For the CEC TL51 models with the Sub-D9 connection, you can correct the Left/Right
setting inside the vM DA468 by replacing the jumper JP10 to 'inverted'.
Input 6 is the Q-Link for I2S connection to e.g. the CT460 CD transport. There are four RCA
connectors for the DATA, MCK, LRCK and BCK. The MCK is the Master Clock output, the
other three are inputs. Connect these to the same named connectors of the transport and
use four identical high quality cables (same model and length).
If you experience any problems, or for upgrading older models (from before June 2011)
always contact your nearest authorized Van Medevoort retailer or distributor.
9
vM DA468 STEREO DIGITAL / ANALOG CONVERTER
MULTI-LINK ON THE vM DA468 CONVERTER.
Advertisement
