Advertisement
11. Output digital. Digital SPDif optical output, send through the signal of the USB or SPDif
input which is switched on.
12. Output digital. Digital output RCA coaxial SPDif, send through the signal of the USB or
SPDif input which is switched on.
13. IEC Power Chassis Connector. To be connected with the proper wall socket, which
must be earthed or grounded. Every Van Medevoort product is optimized for your
country's electrical standards. e.g. 230V-50Hz or 115V-60Hz. This cannot be changed.
Please check that your product is set to the correct voltage setting BEFORE connecting
to an AC power outlet. Any faulty connection will invalidate the warranty.
14. RS232 I/O. This connection is not standard, but optional, and can be used in domotica
and home automation systems to remote control the converter.
15. Outputs analog. These analog XLR balanced outputs go to the balanced inputs of the
stereo (pre) amplifier. The right one is for the left channel, the left one is for the right
channel. Seen from the back of the converter.
16. Outputs analog. these analog RCA outputs go to the RCA inputs of the stereo (pre)
amplifier. The top one is for the left channel, the bottom one for the right channel.
6
vM DA468 STEREO DIGITAL / ANALOG CONVERTER
Advertisement
