Advertisement
1
1. ON / OFF. Power switch.
LED indication control. Fully red when switched ON, 50% red when in STANDBY mode
(selected with the Remote Control).
Above the LED you will find the Infra Red sensor for the Remote Control.
The functions are "stand-by", mute and input selection.
The Remote Control handset is NOT supplied. Choose a learnable.
The RC codes can you download from our website.
Contact your dealer for more info.
2. 1 - 8. Source selector indicators with LED indication.
These 8 push buttons correspond with the inputs on the backside of the amplifier. The
LED's will go into flickering mode when the signal is switched to MUTE (can only be
selected with a learnable Remote Control).
Inputs 3, 4 and 5 are also switchable between two connectors on the back, to create
extra input connection possibilities.
3
vM DA468 STEREO DIGITAL / ANALOG CONVERTER
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
2
Advertisement
