Copying Files; To Copy A File To An External Hard Disk Drive - Topfield SRP-2100 User Manual

8.4 Copying files
You can copy files between the built-in hard disk drive and
external hard disk drive.
NOTE
If your external hard disk drive is formatted in the FAT16/32 or
NTFS, it can only be read. To enable to write and read, the hard
disk drive must be formatted in the JFS or Ext2/3 file system.
For how to format in the JFS or EXT2/3 file system, refer to
§ 7.6. In addition, the digital receiver can only recognize files
and directories which are named with only alphabetic, numeric
and underscore letters. If there is a file or folder named with
other letters, the digital receiver cannot recognize not only it
but also its subsequent files and folders.
8.4.1 To copy a file to an external hard disk drive
You can copy files to an external hard disk drive.
To copy files, perform the following steps:
1. Select the Entertainment
button, and then the
of graphic files.
2. Put the highlight bar on a desired file and press the
button; if you want to view several files using a slide
show, press the
F1
and effect of slideshow. See § 4.11.
3. To stop viewing, press the
1. Connect an external hard disk drive to the digital re-
ceiver.
2. Press the button and then press the
to select a desird file list except the External list.
8.4 Copying files 83
Photo Album or press the
or button to display the list
button. You can change a time interval
button.
EXIT
OK
or button
8