Topfield SRP-2100 User Manual page 48

40 Preference Settings
If you do not set the local time correctly, the programme time
table provided by the programme guide may be distrustful.
For the programme guide, refer to § 5.3.
1. Set the Mode option to Auto; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 4.1.
3. To get Greenwich mean time, set the GMT Collection
option to one among the following:
Normal from all transponders
CAS Only from transponders of pay services
User Select from transponders specified by user
If you set it to User Select, then the Satellite option and
the Transponder option become enabled. Select your de-
sired satellite and transponders at those options. With
the above settings, the digital receiver will scan all speci-
fied transponders one by one until to get the Greenwich
Mean Time.
4. Make sure that your local time is correctly displayed on
the Local Time option.
Select the Settings
You should see a screen like the
left figure.
You can set the clock manually
or use the time signal, Green-
wich Mean Time (GMT), carried
as part of the digital television
broadcast.
To use Greenwich Mean Time,
take the following steps:
Time menu.