Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips FX30 User Manual

8 Listen to radio

Tune to a radio station

1
Press SOURCE repeatedly to select FM
or AM.
2
Press and hold
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.
Program radio stations
automatically
You can program a maximum of 20 FM and 10
AM preset radio stations.
• In tuner mode, press and hold PROG
for more than two seconds to activate
automatic programming.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» The first programmed radio station is
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 FM and 10
AM preset radio stations.
1
Tune to a radio station.
/ for more than two
2
Press PROG to activate program mode.
3
Press
radio station, then press PROG to confirm.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

• In tuner mode, press
preset number.
/
Tip
•
Position the antennas as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antennas.

Change AM tuning grid

In some countries, the AM radio frequency step
between adjacent channels is 10 kHz (9 kHz in
some areas).
1
Select the tuner source.
2
Press and hold
more than five seconds.
» All preset stations are erased and need
to be re-programmed.
/ to allocate a number to this
/ to select a
on the main unit for
EN 17