Lanier R/C MARINER 40 MK II ARF Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Lanier R/C Manuals
  4. Toy
  5. MARINER 40 MK II ARF
  6. Assembly instructions manual

Lanier R/C MARINER 40 MK II ARF Assembly Instructions Manual

Hide thumbs Also See for MARINER 40 MK II ARF:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Instruction Manual
MARINER 40 MK II ARF
LANIER R/C
Wingspan....
62"
Fuselage Length...
Engine Required ...
Weight........
6 - 7 lbs.
WARRANTY .................. Lanier R/C is proud of the care and attention that goes into the manufacture of parts for
its model kits. The company warrants that for a period of 90 days, it will replace, at the buyers request, any parts or
material shown to the company's satisfaction to have been defective in workmanship or material at the time of
purchase.
No other warranty of any kind, expressed or implied, is made with respect to the merchandise sold by the company.
The buyer acknowledges and understands that he is purchasing only a component kit from which the buyer will
himself construct a finished flying model airplane. The company is neither the manufacturer of such a flying model
airplane, nor a seller of it. The buyer hereby assumes the risk and all liability for personal or property damage or
injury arising out of the buyers use of the components or the finished flying model airplane, whenever any such
damage or injury shall occur.
Any action brought forth against the company, based on the breach of the contract of sale to the buyer, or on any
alleged warranty there under, must be brought within 1 year of the date of such sale, or there after be barred. This
one-year limitation is imposed by agreement of the parties as permitted by the laws of the state of Georgia.
LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401
Assembly Instructions
Wing Loading...
Wing Area...
48"
2-Stroke .40 to .50
© Copyright 2006 Lanier R/C, Inc.
21-23 oz./sq. ft.
687 sq. in.
1

Advertisement

Table of Contents
loading

Related Manuals for Lanier R/C MARINER 40 MK II ARF

Summary of Contents for Lanier R/C MARINER 40 MK II ARF

  • Page 1 6 - 7 lbs. WARRANTY ……………… Lanier R/C is proud of the care and attention that goes into the manufacture of parts for its model kits. The company warrants that for a period of 90 days, it will replace, at the buyers request, any parts or material shown to the company's satisfaction to have been defective in workmanship or material at the time of purchase.

  • Page 2: Wing Assembly

    We do it different. When all the parts are assembled on both wing panels, then join them. You will find this method much easier. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 3 Do both mount. Make sure you have a LH and a RH wing panels. mount. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 4 When cured, match drill the holes with a 3/32” drill. This will give better screw alignment to the nut plate on the LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 5 13. Before pushing the wire through the hole in the float, relieve the edge of the hole with a LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 6 Hold the wing together with masking tape. The masking tape will retain the LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 7: Tail Assembly

    LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 8 Note: Do not glue on bottom dorsal fin yet. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 9: Hinging The Elevator And Rudder

    4. Install rudder and elevator with thin CA, as described when installing ailerons. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 10 1-3/4” between Place a hex nut and clevis on each. servos. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 11: Engine Mounting

    The pushrod brace can now be glued to the bulkhead and the outer sleeves glued to the brace. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 12 Goldberg spinner you will need to leave ¼” clearance. Make sure the engine is square on the mounts and mark the location of the mount LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 13: Cowl Installation

    Adjust the cowl so that you have 3/32” clearance between it and the back plate. Now tape the cowl to the pod. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 14 Locate the fuel tank and assemble the parts on the stopper. Bend the vent line carefully to avoid kinking. File all sharp corners on tubing LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 15 Fasten the clevis on the throttle the firewall. arm. Adjust servo for proper direction and open/close position. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 16 Apply more epoxy if necessary to edges of mast support, at sides, and around the mast. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 17: Installing The Windshield

    The curved end to the inside. are quite faint but if you look closely, you will see them. Once trimmed sand the edges LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 18: Installing The Radio

    Later, you may experiment by shifting the balance up to 1/4" forward or back to change the flying characteristics. If you move the LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 19: Getting Ready To Fly

    Vibration can also cause fuel to foam, Aileron 3/8” up 3/8” down LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

  • Page 20: Charge The Batteries

    1/2 degrees up-thrust in the engine also ever you fly. promotes positive help to accommodate getting up on the step. LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.
  • Page 21 Thin CA (cyanoacrylate) glue Medium CA (cyanoacrylate) glue Thick CA (cyanoacrylate) glue CA remover/debonder 6-minute epoxy 30-minute epoxy Z-42 Threadlock LANIER R/C, INC.- P O Box 458 - Oakwood, GA 30566 - Ph 770-532-6401 © Copyright 2006 Lanier R/C, Inc.

Table of Contents