Operation; Activating The Phone; Standby (Idle Mode) - Doro PhoneEasy 506 User Manual

Activating the phone

Press and hold the red button
Confirm with Yes to power off.
If the SIM card is valid but protected with a PIN code (Personal
Identification Number), PIN is displayed. Enter the PIN code and
press OK (
upper right corner of keypad).
Note!
If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Attempts: # shows the number of PIN attempts left. When no more
attempts remain, PIN blocked is displayed. The SIM card must now
be unlocked with the PUK code (Personal Unblocking Key).
Enter the PUK code and confirm with OK.
1.
Enter a new PIN code and confirm with OK.
2.
Re-enter new PIN code and confirm with OK.
3.
Start-up wizard
When starting the telephone for the first time, you can use the
Start-up wizard to set some basic settings.
Press Yes to change or No if you do not want to change.
•
Tip:
You can run the Start-up wizard later if you want, see
p.18.

Standby (Idle mode)

When the phone is ready to use, and you have not keyed in any
characters, the phone is in standby.
Left selection button in standby is Menu.
Right selection button in standby is Name.
Tip:
You can always press

Operation

upper left corner of keypad). Delete with Clear (
to return to standby.
English
on the phone to turn it on/off.
5
Start-up wizard,