Dvd Codes - JVC AV-36F802/Y Service Manual

Remote Programming

DVD codes

The remote control is prog rammed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
3) Press and hold down the D
4) With the D
ISPLAY
5) Release the D
ISPLAY
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 50.
• After you program your remote, some DVD buttons may not work properly. If some buttons
do not work properly, use the remote control which came with your DVD player.
20
button.
ISPLAY
button held down, enter the first code number listed with the 10 key pad.
button.