Digitus HD NETWORK SURVEILLANCE CAMERA User Manual page 19

STEP2: Select the functions when needed:
ICON FUNCTION
Fit to screen /
/
Restore to original size
Take snapshots
Enable Auto mode
Enable DPTZ
Zoom in / out
/
Max. zoom in / out
/
DESCRIPTION
There are several monitor resolutions available. When the selected resolution is out of your
current live view support, a part of your surveillance area might get covered on the screen, and
you need to manually move on the screen to check the covered part.
: This is used to scale the selected resolution to fit in the current live view size.
: This is used to restore the scaled live view resolution to its original size.
Click to take a snapshot of the current view, and save to the location specified in "Config." 
"Camera"  "Camera"  "Snapshot Path".
Click to activate the auto mode of the camera. The auto mode could be "Sequence" or "Auto
Pan" specified in "Config."  "Camera"  "Cruise"  "Active Mode".
Note: This function is available only when DPTZ is enabled.
Sequence: Move to several preset points accordingly and regularly specified in "Config." 
"Camera"  "Cruise"  "Active Mode"  "Sequence".
Note: Preset points are set in "Config."  "Camera"  "Preset".
Auto Pan: Pan automatically and horizontally.
Click to activate the digital PTZ function. When this function is enabled, the following
operations are available:
 Auto mode
 Move up / down / left / right after digital zoom-in.
Click to zoom in / out the image.
Click to zoom in / out the image.
16