Scheduler Remote Control; Setting The Time - iRobot Robot Owner's Manual

Scheduler Remote Control

Power
Clean
Directional
Buttons
The Scheduler Remote Control is an optional accessory.
To schedule Dirt Dog to clean, use the Scheduler Remote Control to program
your cleaning times. Then use the Scheduler Remote Control to send your
schedule to Dirt Dog and the scheduling Virtual Walls.
Install the batteries and set the time before using for the first time.

Setting the Time

Open the Scheduler Remote Control's front cover.
1
The display will turn red and read "SET TIME".
Press New/Save and Delete simultaneously.

The display will change to read "SUN 12:00".
Press to change the day.
3
Press to navigate to the hour on the display.

Press to change the hour. To select AM or PM,

simply scroll past 12:00.
Press to navigate to the minute on the display.

Press to change the minute. Hold

scroll quickly.
Press New/Save to save. After the time has been

set, it will flash three times to indicate the time has
been saved. Close the Scheduler Remote's cover to
verify that the correct time has been set.
1
iRobot Dirt Dog Owner's Manual
Spot
Max
Front Cover
to
(optional accessory)
Scheduling
Virtual Wall