Technical Data - Jonsered CS 2255 Operator's Manual

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/hp @ rpm
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chain saw without bar or chain, empty tanks, lb/kg
Chain/bar
Standard bar length, inch/cm
Recommended bar lengths, inch/cm
Usable cutting length, inches/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Chain speed at max. power, m/sec
NOTE! This spark ignition system complies with the Canadian standard ICES-002.
Recommended cutting equipment for Canada
The following is a list of recommended cutting equipment for Jonsered chain saw models CS 2255. The combinations
of powerhead, bar and chain meet all requirements outlined in the CSA Z62.1-03 Chainsaws and Z62.3-04 Chainsaw
Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent
or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed bars and chains or "Type C Low-Kickback Saw Chains" which
are available at your dealer.
TECHNICAL DATA
3
CS 2255
3,38/55,5
1,85/47
32,0
2700
2,6/3,5 @ 9000
NGK BPMR 7A/ Champion RCJ 7Y
0,02/0,5
0,93/0,44
11,5/9,0
0,68/0,32
Automatic
12,8/5,8
(13,0/5,9 with tool-less chain tensioner)
18"/46
13-20"/33-50
12-19"/31-49
0,325"/8,25
3/8" /9,52
0,050"/1,3
0,058/1,5
Rim/7
20,0
English – 41