Address Book - Oce OP1016 Operation Manual

Performing the Required Operation at the Scanner
4 Use the
Sending to User (SEND TO USER PC), Private Book, and Common Book. Select the
desired item and press the Enter key.
When storing data in the PC of the transmitter (user):
Move
USER PC) and press the Enter key.
Note
When registering a transmitter (user), you must set the IP address of the computer.
When selecting a destination (receiver) from the private

address book:

1. Move
2. Move
Notes
•
•
3. If you have selected the destination, move
When selecting a destination (receiver) from the common
address book:
Move
Enter key.
Operate in a similar way to the procedure for the
private address book.
Notes
•
•
•
3-2
keys to move
and
to select 2 Sending to User (SEND TO
to select 3 Private Book and press the
Enter key.
to select the desired destination and press
the Enter key.
If a password has been registered for the selected destination, you must enter the password.
Enter the password using the numeric keys and press the Enter key.
When you enter a displayed number using the numeric keys, the confirmation screen will
appear. When you press the Enter key, the destination will be selected.
select 000 Finish to select (000 SELECT.
COMPLETE) and press the Enter key.
to select 4 Common Book and press the
For the private address book, AddressBook must be started in the computer of the transmitter
(user).
For the common address book, the destinations must be set with a web browser or
AddressEditor.
Up to 20 destinations can be selected at the same time.
to select the desired destination. An item can be selected from
Select Address Book
Select Address Book
Select destination.
#---
to
Select destination.
#---
Select Address Book
End
Sending to User :Off
Private Book
End
Sending to User :Off
Private Book
000 Finish to select
001 AdrNOPQRSTUVWXYZ
000 Finish to select
001 AdrNOPQRSTUVWXYZ
Sending to User :Off
Private Book
Common Book