Table of Contents
Advertisement
8 Additional Information
Specifications
34
Recording method ............................................................. Magnetic field modulation
Playback method..................................................................... Non-contact optical type
Sampling frequency ............................................................... 44.1 kHz, 32 kHz, 48 kHz
Frequency response ................................................................................. 20 Hz - 20 kHz
Signal-to-Noise ratio .............................................................................................. 98 dB
Wow and flutter ........................................................................... Limit of measurement
Power requirements ........................................................................... AC 230V, 50/60 Hz
Power consumption ................................................................................................ 18 W
Power consumption in standby mode (when connected to XC-L77) ................... 0,9 W
Dimensions................................................................. 220 (W) x 75 (H) x 310 (D) mm
Weight .................................................................................................................... 2.6 kg
Accessories
Operating instructions .................................................................................................. 1
Optical digital cable ...................................................................................................... 1
Power cable ................................................................................................................... 1
Warranty card ................................................................................................................ 1
Note: Specifications and design subject to possible modification without notice, due
to improvement.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the
cord and never touch the power cord when your hands are wet as this could
cause a short circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never make a knot in
the cord or tie it with other cords. The power cords should be routed such
that they are not likely to be stepped on. A damaged power cord can cause a
fire or give you an electrical shock. Check the power cord once in a while.
When you find it damaged, ask your nearest PIONEER authorized service
center or your dealer for a replacement.
overwriting type
(±0.001% W.PEAK) or less (EIAJ)
Advertisement
Table of Contents
