Table of Contents
Advertisement
5 More Playback Features
Playing Things Again
After setting a repeat mode, the
display shows RPT for repeat all,
or R1 for repeat track
The repeat mode is indicated in
the display while the disc is
playing
Tip
You can use either of the repeat
modes together with the program
play mode.
Setting the repeat mode to
plays the tracks in the
REPEAT ALL
playlist over and over. The display
indicates the mode:
In repeat track mode, just the
current track in the playlist
repeats. The display indicates the
mode:
18
You can set the MD player to repeat just a single track, or the whole disc.
MENU
AUX/CD-R
STANDBY/ ON
MD
1
Press MENU and select REPEAT MODE.
This menu option is available when the disc is stopped, paused or playing.
Remember: switch between menu options using the $ and ›
buttons; select the option by pressing
2
Select a repeat mode.
Three options are available:
$
REPEAT TRK
-
REPEAT OFF
REPEAT ALL
Remember: switch between menu options using the $ and ›
buttons; select the option by pressing
3
Start playback.
In one track repeat mode, any track you choose will repeat. If you jump to
another track (using track skip), then the new track will start repeating.
In all track repeat mode, whenever the end of the disc is reached, the player
will jump back to the first track and continue playback. You're still free to
skip tracks and use manual search.
Note: The repeat mode you set stays active until you:
select another repeat mode, or switch repeat mode off using the menu.
eject the disc.
switch to standby mode.
SET
&
SOUND
DISPLAY
SET
MD
TAPE
TIMER/
! —
REC
CHARACTER
CANCEL
4
.
SET
? ›
?
.
SET
$
›
VOL
+ ⁄
¢
Advertisement
Table of Contents
