Table of Contents
Advertisement
Switch to mono for long-play
The
indicator lights in
MONO LP
long-play mode
Selecting Analogue Input Recording
By default, auto input is active
and the
indicator is lit
DIGITAL
The
indicator disappears
DIGITAL
when analogue input is selected
6 More Recording Features
MENU
AUX/CD-R
SOUND
STANDBY/ ON
1
Press MENU and select REC MODE.
This menu option is only available when the disc is stopped.
Remember: switch between menu options using the $ and ›
buttons; select the option by pressing
2
Switch to MONO LP or STEREO SP using
the $ and › buttons.
3
Press SET to exit the menu.
The
indicator in the display lights when
MONO LP
When recording a CD from the CD receiver, you can specify that the recording should
be via the analogue input of the MJ–L77 rather than the optical digital cable. This can
be useful if you run up against an SCMS copying problem from a CD-R disc, for
example. If the disc is copy protected you'll see the message
display. If this happens, switch the input select to analogue, then start recording.
MENU
AUX/CD-R
SOUND
STANDBY/ ON
1
Press MENU and select INPUT SEL.
This menu option is only available when the disc is stopped.
Remember: switch between menu options using the $ and ›
buttons; select the option by pressing
2
Switch to ANALOGUE (or AUTO) using the
$ and › buttons.
3
Press SET to exit the menu.
The
indicator in the display lights when
DIGITAL
SET
&
DISPLAY
SET
MD
TAPE
TIMER/
! —
REC
CHARACTER
CANCEL
4
.
SET
SET
&
$
DISPLAY
SET
MD
TAPE
TIMER/
! —
REC
CHARACTER
CANCEL
4
.
SET
$
›
VOL
+ ⁄
¢
is selected.
MONO LP
'
in the
CAN
T COPY
›
VOL
+ ⁄
¢
is selected.
AUTO
<ARB7195>
21
Advertisement
Table of Contents
